Laser Cutting Machine (CMC-1390)

Product Description

CMC-1390 Laser cutting machine adopts gray cast iron as its structural components and ensures excellent flatness through machining. It is utilized as the installation base for moving parts, as well as optical source and optical path. The principle is to make use of the vibration reducing property of gray cast iron to meet the demand for maintaining stable and operation accuracy in high speed mode...

Technical Characters:
A flexible design of its mechanical structure, control system, optical system and electrical system will allow certain variations in response to the different process requirements from the market.

Moving parameters

Location accuracy: ± 0.05

Maximum speed: 35m/min

Laser power: 80~150w

Maximum moving distance of Z axis: 50mm

Mechanical Structure:
1. It adopts gray cast iron as its structure components to improve the stability and reliability of the moving and optical path system.

2. Ball screw-moving unit with linear guide.

3. Follow-up type upward air suction device and downward air suction device.

4. Auto-focus device of far infrared sensing type. (Option upon requirements)

5. Optical path and moving parts sealed for protection.

6. Upward and downward air blowing to cool the focus lens down.

7. Optics structure of glass frame type for easy dismantling.

8. A separate design for upper and lower parts will facilitate the installation.

Control system:
1. Embedded control system

2. Able to run in offline mode

3. Support data transferred from network and USB flash disk

4. Support dual laser beam cutting

5. Support RF and glass-tube laser

6.8-inch touch screen with full displaying color

Optical system:
1. Specialized tight clip for fixation of laser tube

2. Supporting frame for laser tube that being able to adjust -hree-dimensional position

3. Adjusting frame with interlock device for three-dimensional reflecting -irror

4. Full-sealed for optical path protection

5. Laser beams of red light and carbon dioxide combined due to the design in which same optical path are collimated (Optional and applicable to RF laser)

6. Protective air circulation with activated carbon for filtration and circulation water for cooling.

Electrical system:
1. Double-side servo drive system disposed on Y axis (Cross coverage exceeds 1.3 meter).

2. A complete safety protective device will provide shield protection to -laces that may bring harm to human body.

3. Flow switch of turbo type can offer the control to the flow rate of the cooling water for laser tube.

4. A series of certificated electrical components are well selected to meet the safety standards of European and American markets.